There are a lot of reasons to love honey, and one of them is if you harvested it yourself. In the past, people risked encounters with the violent sentinels and residents of honeycombs just to get honey. Luckily, along came honeycomb extractors.
These machines take honey from frames easily and without destroying them. Regardless of whether you are a hobbyist or owner of a small business, you need to have one of the best honey extractors around. Check out our honey extractor reviews below.
#1. VIVO BEE-V002 2-Frame Stainless Steel Manual Crank Honey Extractor
We are making this our top honey extractor because we know of a lot of people who swear by its capabilities and reliability. This extractor has a stainless steel body, just like most honey extractors available right now.
The lid on top is made of clear Plexiglass, so you can easily check out what is going on inside as it is extracting. Plexiglass is also well-known for its durability, so it is always an advantage. As seen in the photo, this honey extractor is to be cranked manually.
The drum height is 24 inches, and the diameter is 15 inches. The distance between the honey gate to the floor is 15.25 inches. These numbers are not bad at all for average frames.
Conclusion: You can’t go wrong with word of mouth. This honey extractor has won the hearts of many hobbyists, and it is apparently well-deserved. In our opinion, the machine looks sturdily built, the drum is spacious enough, and it seems easy to operate. It is also not too costly. All in all, we like this because it is effective and efficient.
● Many positive reviews
● Simple operation
● Sturdy build quality
● Clear and durable lid
● Built to last
● Manually cranked
#2. Goplus 2-Frame Stainless Steel Large Honey Extractor
Made of stainless steel, this honey extractor feels sturdy and durable. You may notice that it stays very much stable during cranking. The lids are made of clear plastic, so you can easily see what is going on inside.
It fits shallow, medium, and deep frames, two frames at a time, so this should be sufficient if you are not really looking into large-scale beekeping or honey production.
The handle has a so-called spring clutch. This keeps the handle from spinning back on its own after you release it.
Conclusion: In general, we like what this honey extractor has to offer. The body looks durable and sturdy enough for it to withstand regular use for several years. We also found that it is quite easy to operate and put together.
● Durable stainless steel
● Clear plastic lids
● Spring clutch in handle
● Easy to clean
● Isolated complaints about missing or defective parts
#3. Best Choice Products 2-Frame Stainless Steel Honey Extractor
We like that this honey extractor from Best Choice Products is relatively cheap given the size and the capacity. It is a tall two-frame extractor made of durable stainless steel.
Also, according to the manufacturer, some items may be handcrafted, which may explain differences or imperfections in terms of the appearance of the extractor. To us, this is not a deal-breaker. Sometimes, hand remains better than machine.
Like most honey extractors, this one comes with a clear lid, which makes it easy to see the progress of extraction.
Conclusion: In summary, we prefer this honey extractor to many of its kind in the same price range. At this price, you can’t expect top-of-the-line features. The important thing is that the machine gets its job done right and well.
● Easy to assemble
● Convenient to use
● May be too short for some
#4. FoodKing 4-Frame Stainless Steel Honey Extractor
This model is ideal if you are looking into small production or simply want to get as much honey as possible within a short time. This honey extractor can fit four frames simultaneously, and it is electric, so there is no exhausting cranking.
The height is 24 inches, and the diameter is 20 inches. The lid is double-sided and made of clear perspex. Its body is made of 304 stainless steel, so it should be strong and sturdy.
Conclusion: This may be noticeably more expensive than the other honey extractors on this list, but that is because of its 4-frame capacity. The rest is relatively standard, but we do like that it is electric because it means there is no tiring manual cranking.
● Quiet electric motor
● Wider drum than average
● Double-sided lid
● Slightly rounded basket mesh
● Few reports of machine rattling during extraction
#5. OrangeA 4-Frame Honey Extractor
This is another four-frame honey extractor. The size is fairly large and should be sufficient for common operations. The drum height is 24 inches, and its diameter is 20 inches. This is an electric extractor that runs on 120 W.
It also has double Plexiglass lids. This is good in our book because you can never go wrong with the strength of Plexiglass.
The entire body is made of stainless steel as well, so it should hold up well against the rough job of extracting honey repeatedly. The bottom is conical, so you avoid wasting honey when draining.
Conclusion: If you are looking for a good four-frame electric honey extractor, we think this should be a good option. We think its charm lies not in fancy features (It has fairly basic ones.) but in the durability and strength of the materials.
● Big drum
● Plexiglass double-lid
● Durable and safe food-grade stainless steel
● High-precision bearing
● Few complaints about machine wiggling during operation
#6. Hardin Royal 2 Motorized 2-Frame Electric Honey Extractor
This is another electric honey extractor (110 V). It can fit two frames at once, and it has variable speed. The body is made of stainless steel, and it does look and feel very strong and stable.
The lid is also made of Plexiglass, and legs are included. It can work with two shallow, medium, or deep frames. This is a little less than the capacities you can find in the options higher up in this list, though.
Conclusion: We recommend this honey extractor for individuals with up to around 10 hives. We think the price tag is fairly justified, seeing that this is an electric extractor made of premium-grade materials.
● Uses Plexiglass lid
● Variable speed motor
● Parts and servicing available
● Relatively small
#7. ZENY Pro 2-Frame Stainless Steel Honey Extractor
We like this honey extractor because of its seamlessly welded stainless steel body. It appears fairly well-built and looks very presentable for something that does such a rough task. It is also easy to assemble, and the crank does not hurt the hands.
Conclusion: This honey extractor is an affordable option, so it is ideal for those who are on a budget or are just starting out and are still hesitant to splurge on honey extraction equipment.
● Solid feel and build
● Easily operated
● Easily cleaned and assembled
● Quiet operation
● Height from honey gate to floor may be too short for some
#8. Honey Keeper Pro Electric 4-Frame Stainless Steel Honey Extractor
If you are looking for a cheap honey extractor that performs its tasks nicely and efficiently, this may be the model you are looking for. This is ideal for hobbyists with very small operations.
The stainless steel body appears to be strong and durable enough, so we think it will last a long while especially when used properly and cleaned regularly.
Conclusion: You might want to give this honey extractor a go if you have only a few hives and/or are on a budget. All the standards are there, and the body appears to be sturdily Constructed.
● Variable speed motor
● Long power cord
● Relatively new model
Read More: Best Food Dehydrators.